Getting started Front panel features
FortiGate-4000 Installation and Configuration Guide 29
FortiBlade-4010 module
Each FortiBlade-4010 module is an independent FortiGate-4000 antivirus firewall
capable of operating at gigabit network speeds. You can install up to 10
FortiBlade-4010 modules in the FortiGate-4000 chassis. Each FortiBlade-4010
module can operate as a standalone FortiGate-4000 antivirus firewall or you can
group FortiBlade-4010 modules into high availability (HA) clusters. Each cluster
provides failover between the FortiBlade-4010 modules in the cluster. In addition,
when operating in active-active HA mode, the FortiBlade-4010 clusters provide
antivirus scanning load balancing to increase virus scanning performance.
Figure 4: FortiBlade-4010 front panel
Table 2: FortiBlade-4010 module front panel buttons
Button Description
KVM/Access Press and hold for approximately 5 seconds for KVM access to a
FortiBlade-4010 module.
Power Power the FortiBlade-4010 module on or off.
POWER ON/OFF
LAN 1 LAN 2
PWR/KVM STATUS
KVM/ACCESS
KVM/ACCESS
button
PWR/KVM and
STATUS LEDs
LAN 1 and
LAN 2 LEDs
Not used
Power button
Module lock
and handle
Mounting Knots
To Next Page
Loading...
