Fortinet FortiGate 4000 - Factory Default Transparent Mode Network Configuration; Factory Default Firewall Configuration

Getting started Factory default configuration
FortiGate-4000 Installation and Configuration Guide 49
Factory default Transparent mode network configuration
If you switch the FortiGate-4000 unit to Transparent mode, it has the default network
configuration listed in Table 13.
Factory default firewall configuration
The factory default firewall configuration is the same in NAT/Route and Transparent
mode.
Table 12: Factory default NAT/Route mode network configuration
Administrator
account
User name: admin
Password: (none)
Internal interface
IP: 192.168.1.99
Netmask: 255.255.255.0
Management Access: HTTPS, Ping
External interface Manual:
IP: 192.168.100.99
Netmask: 255.255.255.0
Default Gateway: 192.168.100.1
Primary DNS Server: 207.194.200.1
Secondary DNS Server: 207.194.200.129
Management Access: Ping
Out of Band interface
IP: 172.16.1.2
Netmask: 255.255.255.0
Default Gateway: 172.16.1.1
Management Access: HTTPS, Ping
Table 13: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 10.10.10.1
Netmask: 255.255.255.0
Management access
Internal HTTPS, Ping
External Ping
Out of Band Ping, HTTPS
Out of Band interface
IP: 172.16.1.2
Netmask: 255.255.255.0
Default Gateway: 172.16.1.1
Management Access: HTTPS, Ping
DNS
Primary DNS Server: 207.194.200.1
Secondary DNS Server: 207.194.200.129