Need help?Do you have a question about the Fortinet FortiGate 80F Series and is the answer not in the manual?
General| Firewall Throughput | 10 Gbps |
|---|---|
| Form Factor | Desktop |
| Humidity | 10-90% non-condensing |
| New Sessions Per Second | 35000 |
| Interfaces | GE RJ45 Ports: 10 GE SFP Slots: 2 USB Port: 1 Console Port: 1 |
| Weight | 4.85 lb (2.2 kg) |
| Power Supply | External AC Power Supply |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -35°C to 70°C (-31°F to 158°F) |
| New Sessions/Second | 35000 |
CLI management computer interface and USB 3.0 server port.
1 Gbps SFP interface for network connectivity.
1 Gbps Ethernet interfaces for WAN connections.
1 Gbps Ethernet interface, specific to FG 80F-Bypass models.
RJ-45 ports 1 to 6 offering 1 Gbps Ethernet connectivity.
RJ-45 FortiLink ports A & B for 1 Gbps Ethernet.
Details the 12V DC 3A, 100-240V AC 50/60Hz power requirements.
Describes LED states for LOGO, BYPASS, STATUS, HA, POWER, PORT LINK/ACT, WAN, and SFP.
Restores factory defaults and BLE settings.
Passive directional antenna connection using SMA connector.
CLI management computer interface and USB 3.0 server port.
1 Gbps SFP interface for network connectivity.
1 Gbps Ethernet interfaces for WAN connections.
RJ-45 ports 1 to 6 offering 1 Gbps Ethernet connectivity.
RJ-45 FortiLink ports A & B for 1 Gbps Ethernet.
Details the 12V DC 5A, 100-240V AC 50/60Hz power requirements.
Describes LED states for LOGO, STATUS, HA, POWER, WIFI, PORT LINK/ACT, WAN, and SFP.
Restores factory defaults and BLE settings.
Passive directional antenna connection using SMA connector.
CLI management computer interface and USB 3.0 server port.
1 Gbps SFP interface for network connectivity.
1 Gbps Ethernet interfaces for WAN connections.
RJ-45 ports 1 to 6 offering 1 Gbps Ethernet connectivity.
RJ-45 FortiLink ports A & B for 1 Gbps Ethernet.
Details the 54V DC 2.78A, 100-240V AC 50/60Hz power requirements.
Describes LED states for LOGO and WIFI connectivity.
Describes LED states for STATUS, PWR, and HA.
Describes LED states for SFP/WAN, MAX PoE, and Ports PoE.
Restores factory defaults and BLE settings.
To Next Page