Fortinet Version 4.0 MR1 User Manual

Custom Installer Packages Managing FortiClient with FortiManager
FortiClient Endpoint Security Version 4.0 MR1 Administration Guide
04-40001-99556-20090626 19
http://docs.fortinet.com/ • Feedback
For a FortiClient PC centrally managed by either a primary FortiManager unit on IP
address 172.16.100.5 or a secondary FortiManager unit on 172.16.100.6, the installation
command line is:
FortiClientSetup /v"FMGRENABLED=1 FMGRIP=172.16.100.5
FMGRTRUSTEDIPS=172.16.100.5,172.16.100.6"
Note: You must enter the entire command on a single line.
Example command lines for the .zip package
Expand the .zip package into a folder before you execute these commands.
For a FortiClient PC centrally managed by a FortiManager unit on IP address
172.16.100.5, the installation command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRIP=172.16.100.5
For a FortiClient PC centrally managed by either a primary FortiManager unit on IP
address 172.16.100.5 or a secondary FortiManager unit on 172.16.100.6, the installation
command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRIP=172.16.100.5
FMGRTRUSTEDIPS=172.16.100.5,172.16.100.6
Note: You must enter the entire command on a single line.
Configuring central management by discovered FortiManager units
Using installer command line options, you can enable discovery of FortiManager units and
specify by IP address the FortiManager units from which the FortiClient application
accepts central management.
The command-line options are as follows:
For a complete list of installer public properties that can be specified when installing
FortiClient, see “Appendix A: Installer Public Properties” for more information.
Example command lines for the .exe package
For a FortiClient PC that accepts central management by any FortiManager unit on subnet
172.16.100.0/24, the installation command line is:
FortiClientSetup /v"FMGRENABLED=1 FMGRENABLEDISCOVER=1
FMGRTRUSTEDIPS=172.16.100.0/255.255.255.0"
Note: You must enter the entire command on a single line.
Example command lines for the .zip package
Expand the .zip package into a folder before you execute these commands.
For a FortiClient PC that accepts central management by any FortiManager unit on subnet
172.16.100.0/24, the installation command line is:
msiexec /i FortiClient.msi FMGRENABLED=1 FMGRENABLEDISCOVER=1
FMGRTRUSTEDIPS=172.16.100.0/255.255.255.0
Note: You must enter the entire command on a single line.
FMGRENABLED=1 This enables FortiManager central management.
FMGRENABLEDISCOVER=1 This enables the FortiClient application to request central
management.
FMGRTRUSTEDIPS=<FM_IP1>,
<FM_IP2>,...
Specify individual IP addresses, IP address ranges or subnets
from which the FortiClient application accepts central
management.

Fortinet Version 4.0 MR1 Specifications

General

Brand	Fortinet
Model	Version 4.0 MR1
Category	Software
Language	English