EasyManua.ls Logo

Fortress Technologies Convection Oven Range Line - Positioning and Clearances; Foot Leveling Adjustment

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 - Foot regulator.
Warranty/Tech Support 800•722•6075
Service, Installation
& Care Manual
15
2.9 Positioning
Installation must be on a at and level
surface.
It is reccommended to install the
equipment under hoods or exhausts.
There must be a distance of at least 8"
at the rear, 6" at the right and left of the
equipment from combustable surfaces as
shown in the gure (side).
2.10 Foot Leveling
For a good operation of the Convection/
Standard Oven Range Line it is ideal that
the equipment is level and xed perfectly
with the work surface. To adjust the leveling,
turn item 1 (identied in the drawing)
counterclockwise to open and clockwise to
close to nd the best position to operate the
equipment safely.
02. EQUIPMENT INSTALLATION