WARNING: Risk of re / ammable materials.
Warranty/Tech Support 800•722•6075
Service, Installation
& Care Manual
3
IMPORTANT SAFETY INSTRUCTIONS
• Installation must conform with local codes, or in the absence of local codes, the
National Fuel Gas Code, ANSI Z223.1 (latest edition). In Canada, installation should
conform to installation codes for gas burning appliances and equipment standard
CAN/CGA-B149.1 or the propane installation code, CAN/CGA-B149.2, as applicable.
• Installation must be performed according to the manufacturer’s instructions and by
qualied and authorized persons.
• For repairs, contact an authorized service technician only and request original
replacement parts.
• Before operating the equipment and whenever there is any doubt about its operation,
the user has the duty to read and understand this manual in detail.
• Install the equipment in a place where there is sufcient physical space for perfect
handling of the equipment.
• Never use your equipment without rst installing it correctly.
• If any abnormalities in operation are observed when using the equipment, discontinue
use, close the manual gas shut off valve, and call an authorized service technician to
correct the problem.
• Any unauthorized alteration and / or tampering is DANGEROUS and will void all
warranties.
• Close the gas valve that powers the equipment and check if the knobs are in the
closed position when: not in use, before servicing and cleaning the equipment.
• Use three or more people, or a load lifting device to move and install it.
• Do not soil, remove or obstruct the identication labels.
• For proper operation of the appliance, do not obstruct the ow of gas and ventilation.
• When your equipment is in use, accessible parts can become hot, and children should
be kept away.
• Ensure that children do not play with the equipment.
• Always check if the gas connections are correctly installed, have no malfunctions and
no gas leaks.
To Next Page
Loading...
Need help?
General