14
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before starting the program.
Prewash
A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent
and time. Pre-wash without detergent is recommended for lace and curtains.
Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
Rinse Plus
This function enables the machine to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on
thespinspeedindicator. spin
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then,
depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. When "No
Spin" is selected, the rinse level indicator lights will not turn on.
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.
Auxiliary function buttons may differ according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be selected together with a previously selected function is chosen, the
first selected function will be cancelled and the last auxiliary function selection will remain active.
For example: If you want to select pre-wash first and then quick wash, pre-wash will be cancelled and quick
wash will remain active. Auxiliary function that is not compatible with the program cannot be selected.
(see “Program Selection Table”)
If the programme has not reached the spinning step, you can change the speed without switching the
machine to Pause mode.
Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 19 hours. Delayed start time
can be increased by increments of 1 hour.
Rinse hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold
function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when
there is no water in the machine. Press Start / Pause button after this process if you want to drain the water
without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. The
programme will resume. Water is drained, laundry is spun and the programme is completed.
1.Open the loading door,place the laundry and put detergent. etc.
2.Select the washing programme, temperature, spin speed and , if required, the auxiliary functions.
3.Set the desired time by pressing the Delayed Start button.
To Next Page
Loading...
Need help?
General
