Operating Features
The Forward FN455 device is designed for long-term use. Please follow these guidelines to
ensure long life and maximum performance:
Before using the attachment make sure you mount it according to the instructions in the
Installing Digital Module on the Optical Device and Installing Pulsar 5x30 Monocular
on to the Digital Module sections.
Power off the device after use.
Do not repair or dismantle an attachment under guarantee by yourself!
The device can be used over a wide range of temperatures. If the device has been
operated in the cold and brought into a warm room, do not remove it from its carrying
case for at least 2-3 hours; this will prevent condensation forming on the external optical
elements.
Inspect and maintain the device regularly to ensure trouble-free operation and to avert
and eliminate the cases of premature wear and tear and failure of components.
To Next Page
Loading...