Wi-Fi Function
The device has a function for wireless communication with external devices (smartphone or
tablet) via Wi-Fi.
Turn on the wireless connection module with a long press of theLEFT (8) button.
Wireless operation is displayed in the status bar in the following:
Connection Status Indication on the status bar
Wi-Fi disconnected No icon
Wi-Fi turned on by the user, Wi-Fi
connection in the device is in progress
Wi-Fi turned on, no connection to the
device
Wi-Fi turned on, the device is
connected
The device is recognised by a mobile device under the label “Forward F_XXXX”, where
XXXX are the four last digits of the serial number.
Once the password has been entered on the mobile device (for more information on
setting a password, see the Password Setupsubsection in the Wi-Fi Settings section)
and the connection has been established, the icon in the status bar changes to ,
the video signal on the mobile device screen starts after the “viewfinder” button is
activated on the screen of the mobile device. The icon in the status bar changes to
.
Note: you can configure the required access level to your device that is granted to the Stream
Vision application in theAccess Level Setup subsection in the Wi-Fi Settings menu
section.
To see the button operation scheme click here.
To Next Page
Loading...