Forward FN455 - Remote Control Activation

Remote Control Activation
1.
Turn on the Bluetooth module (see the Bluetooth section).
2.
In the Bluetooth section of the menu, use the RIGHT (6) and LEFT (8) buttons to
select the Scan menu item.
3.
Confirm your selection with a short press of the M (7) button.
4.
Press and hold any button on the Remote Control. The Remote Control is visible in the
Bluetooth network and can be connected during this time.
5.
Use the RIGHT (6)and LEFT (8) buttons to select the remote control from the dropdown
list that appears.
6.
Confirm your selection with a short press of the M (7) button.
Notes:
Once paired, the Remote Control can operate the Pulsar device.
Going forward, the Remote Control will automatically connect to the paired device when
within visible range. ?
The name of the remote control and its battery charge level will appear in the list of paired
devices at the bottom of the display in the Bluetooth section of the menu.
To see the button operation scheme click here.