Foscam FI9928P - Page 12

10
need to select one of the following methods to configure port forwarding on your router. For these steps, we will
be using the TP-LINK brand wireless router as an example.
 If there is a UPnP function in your router:
Choose "Forwarding > UPnP", make sure that the Current UPnP Status is Enabled.
 If there is no UPnP function in your router:
You need to manually add port(HTTPS port) forwarding, refer to the following steps. You need go to the
"Forwarding > Virtual Servers" panel for setup.
Click Add New.
Input the port and IP address of
your camera and click Save.