NVR User Manual
www.foscam.com
Step3
You can configure the privacy zone settings for the camera. Check the Enable Privacy
checkbox and it pop up a window. If the IPC device type is MJ or IPC protocol type is ONVIF,
the feature is invalid.
Step4 You can use the mouse to click and drag the text frame on the live view window to adjust the
OSD position.
Step5 Click Save button to finish the mask area setting. The mask area will be marked with black.
-------End
Video Encode
Choose (Parameter Configuration) > Basic Settings > Video Encode. The Video Encode
page is displayed.
You can configure the encoding scheme parameters of the IP Camera, the NVR system will
synchronize your IP camera with encoding scheme.
You can select one channel from drop-down box list..
You can modify the IP Camera's name.
After you modify the name and save the modification, the NVR system
synchronizes the channel name to the corresponding IPC device name.
The channel name will be shown on the top left of the video image.
There are two options: Yes or No. Select Yes and you can see the IP
camera's name on the video
There are two options: Yes or NO. Select Yes and you can see the
system date on the channel video.
To Next Page
Loading...
