Need help?Do you have a question about the Foscam N300 and is the answer not in the manual?
General| Brand | Foscam |
|---|---|
| Model | N300 |
| Category | Wireless Router |
| Language | English |
Lists the items included in the router's package.
Introduces the router's front panel and LED indicators.
Details the preparation and physical connection steps for the router.
Outlines the initial steps to configure the internet connection.
Guides on checking the router's internet connection status.
Step-by-step guide to connect to the wireless network on Windows 7.
Step-by-step guide to connect to the wireless network on Windows XP.
Displays the current operating status of the router and WAN connection.
Configures PPPoE, Static IP, DHCP, PPTP, L2TP, PPPoE Dual Access.
Copies the MAC address to the router for ISP network access.
Sets the speed and duplex mode for the WAN port.
Configures basic LAN network parameters like IP and Subnet Mask.
Configures Domain Name System (DNS) server settings.
Configures the DHCP server for automatic IP assignment on the LAN.
Displays a list of devices that have obtained IP addresses from the DHCP server.
General section for configuring wireless network parameters.
Sets the SSID, channel, and broadcast mode for the wireless network.
Secures the wireless network by setting up encryption and passwords.
Manages network access by permitting or forbidding specific MAC addresses.
Covers WISP, Universal Repeater, and WDS Bridge modes.
Shows connected wireless devices and their bandwidth.
Manages and limits bandwidth allocation for devices on the LAN.
Monitors and displays network traffic usage for each connected device.
Forwards internet requests to specific internal servers or devices.
Disables the router's firewall for a specific device for special services.
Allows remote access via a fixed domain name for dynamic IP addresses.
Enables automatic configuration of network devices for internet applications.
Manually defines data transfer paths between networks.
Displays the device's core routing table for path selection.
Controls website access by filtering URLs based on rules.
Filters internet access for devices based on their MAC addresses.
Filters client access based on IP addresses and service ports.
Restarts the router to apply configuration changes.
Resets all device settings to their original factory defaults.
Saves and loads router configuration files for backup and recovery.
Displays a log of the router's operational events and history.
Allows remote configuration and management of the router over the internet.
Sets the router's system time, either manually or via NTP.
Changes the administrator login password for enhanced security.
Updates the router's firmware to improve functionality or fix issues.
Guides on configuring TCP/IP settings for Windows 7.
Guides on configuring TCP/IP settings for Windows XP.
Troubleshooting steps for accessing the router's web utility via LAN IP.
Procedure to reset the router's login password if forgotten.
Solutions for common issues with PPPoE or Dynamic IP connections.
How to use Port Range Forwarding for external access to internal resources.
To Next Page