Why does the sound-field favor one side or another on my Fosgate Audionics Computer Hardware?
If the sound field favors one side or another when using Fosgate Audionics Computer Hardware, verify that the “Balance” control is centered between Left and Right.
What to do if there is no sound from one or more speakers using Fosgate Audionics FAP V1 Computer Hardware?
If you are experiencing no sound from one or more speakers connected to your Fosgate Audionics Computer Hardware, check the connections of the signal cables and the speaker wire at both the speakers and the amplifiers to ensure they are properly connected.
General| Brand | Fosgate Audionics |
|---|---|
| Model | FAP V1 |
| Category | Computer Hardware |
| Language | English |
Essential safety guidelines and warnings for operating the Fosgate Audionics FAP V1.
Instructions for connecting the FAP V1 to AC power and its various audio/video input/output jacks.
Diagram and steps for connecting the FAP V1 outputs to external power amplifiers and loudspeakers.
Instructions for connecting the FAP V1 to a 7.1 multichannel source device.
Procedure for setting accurate Sound Pressure Levels (SPL) for each speaker channel.
Common issues with the FAP V1, their causes, and recommended solutions for resolution.
To Next Page