Fosgate Audionics FAP V1 - 7.1 Channel System Integration

Connection
2200
Connecting a 7.1 Multichannel Device
IMPORTANT: Before attempting to make any connections, verify that the power to all devices are turned off and/or disconnected
from the AC mains. Failure to do so can potentially result in severe damage to your amplifier and loudspeakers.
Use the audio jacks labeled 7.1 INPUTS to connect the FAP V1 to an 7.1 Multichannel device such as the Fosgate Audionics
FAP T1 Preamp/Processor.
The input jacks on the FAP V1 are: Left Front, Center, Right Front, Left Side, Right Side, Left Back, Right Back, and Subwoofer.
Use the following diagram for connecting your system.
Use the diagram on the
previous page for
connecting an external
amplifier and speakers