10
Adjust the frequency range for the
subwoofer.
Setting the sound to your taste
The performance of the audio system including this unit varies depending on the set up
position (such as the relative distance, the height of each speaker, etc), circumstances
(such as the intensity of reverberated sound, level of the sound insulation, etc.) or listening
position.
Setting up each product appropriately gives you better environment.
Using the FREQUENCY knob and PHASE switch on the back of the unit, and the volume
controller of each device, let’s create your own music space just for your taste and favorite
music genre!
Setting flow
Adjust the balance of the volume between
the subwoofer and other speakers.
(this unit)
(the unit)
(this unit)
(PM0.3, 0.1, etc.)
The sound of the subwoofer and other
speakers may cancel each other out (reverse-
phased).
Switch the phase and confirm the volume.
Adjust the volume balance
( page 11)
Step 1
Adjust the crossover frequency
( page 12)
Step 3
Switch the phase
( page 11)
Step 2
To Next Page
Loading...
General