4
ENGLISH
DO NOT over tighten the battery
compartment screws, excessive
force will damage the screw
threads.
Fitting the Batteries
1. Turn off unit prior to tting or replacing batteries.
2. Using the supplied screwdriver unscrew the two battery cover
screws.
3. Pinch either side of the battery cover to grip and pull the cover
away from the case.
4. Take care removing the batteries. Insert new batteries and
ensure correct polarity.
5. For best weatherproong, ensure battery cover has a good seal
by seating it in place applying rm pressure.
6. Re-t cover and screws.
Battery Requirements
The RX+ Micron requires 2 x LR6 AA 1.5V Alkaline batteries. The use of
good quality batteries is essential for maximum battery life.
To reduce the risk of battery leakage:
• DO NOT mix old and new batteries
• DO NOT mix different battery types
• The use of rechargeable batteries is NOT recommended
If the RX+ Micron will not be used for a long period please ensure the
batteries are removed.
To Next Page
Loading...
Need help?
General
