7
ENGLISH
Sensitivity Control
Intelligent Sensitivity Control (With See-Saw Elimination)
Turn the dial clockwise to increase the sensitivity and anti-clockwise
to reduce the sensitivity.
There are eight different sensitivity settings available. In all sensitivity
settings (except maximum), the line must travel the specied distance
in the same direction and within 2 seconds in order to trigger the unit.
Any movement in the opposite direction will reset the distance counter
to zero. This can substantially reduce, or eliminate false triggering
caused by wind and water movement.
Sensitivity Table
Setting 1 = 90mm (Min)
Setting 2 = 73mm
Setting 3 = 56mm
Setting 4 = 34mm
Setting 5 = 17mm
Setting 6 = 11mm
Setting 7 = 5.6mm
Setting 8 = 2.8mm (Max)
Minimum sensitivity
Maximum sensitivity
Low Battery Warning
When the RX+ Micron batteries are low the twin multi-colour LEDs will
automatically change to the colour cyan (green-blue). They will remain
this colour until new batteries are inserted into the alarm.
Once new batteries have been placed into the RX+ Micron the LED
colour will automatically revert back to your last chosen colour.
No audible low battery warning is given by the RX+ Micron.
Controls
Volume Control
Turn the dial clockwise to increase volume, anti-clockwise to lower
volume. There are eight different volume settings available.
The lowest setting is completely silent.
Tone Control
Turn the dial clockwise to raise pitch, anti-clockwise to lower pitch.
There are eight different tone settings available.
To Next Page
Loading...
Need help?
General
