Foxconn D255 - Onboard Device Configuration

23
3
Onboard Device Configuration
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Onboard Device Configuration
Onboard LAN Controller [Enabled]
Onboard LAN PXE OpROM [Disabled]
Onboard USB Controller [Enabled]
Legacy USB Support [Enabled]
USB3.0 Controller [Enabled]
Azalia HD Audio Controller [Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► Onboard LAN PXE OpROM
This item is used to enable or disable Boot Option for Onboard LAN PXE OpROM.
► OnBoard USB Controller
This item is used to enable or disable the Universal Host Controller Interface for USB.
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB3.0 Controller
This item is used to set the transmission rate mode of USB3.0.
► Azalia HD Audio Controller
This item is used to enable or disable the Azalia HD Audio Controller.