17
3
System Information
This submenu is used to set up the standard BIOS features, such as the date, time, IDE channel
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
This item allows you to congure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a eld. Use [+] or [-] to input the value.
The three elds of the setting are <hour> : <minute> : <second> respectively.
Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.
SATA Channel 2
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
tion can be enabled/disabled in the next two settings.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
System Information
System Time [17 : 33 : 49] Help Item
System Date [Tue 10/20/2009]
Use [Enter], [TAB]
► SATA Channel 1 [Not Detected] or [SHIFT-TAB] toor [SHIFT-TAB] to
► SATA Channel 2 [Not Detected] select a eld.
Halt On [All Errors, But ...] Use [+] or [-] toUse [+] or [-] to
Keyboard [Disabled] change system time.
Mouse [Disabled]
Model Name :D52S/D42S
BIOS Version :P01
Memory :1024MB
MAC Address :00-00-00-00-00-30
Genuine Intel(R) CPU @ 1.66GHz
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
17
To Next Page
Loading...
Need help?
General
