Foxconn G31MX 2.0 Series - Page 37

30
3
► Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup screen; When it
is set to “System”, a password is required not only to enter CMOS Setup, but also to start up
your PC.
► APIC Mode (Advanced Programmable Interrupt Controller)
This item is used to enable or disable APIC function.
APIC interrupt subsystems can have as many IRQs as are required in a specic machine.
APICs are benecial for the following reasons :
• APICs can contribute to resolving resource conicts in the PC platform.
• Windows operating systems have been designed with APICs in mind.
• APICs are necessary for enabling new features in the PCI specication.
►Delay For HDD (Secs)
This item allows you to select the delay for detecting ATA/ATAPI devices while booting.
► Full Screen Logo Show
This item allows you to enable or disable full screen logo show.
► Small Logo(EPA) Show
This item allows you to enable or disable the EPA logo.