39
3
Security Chip Conguration
Note: Only the TPM device is connected to the computer, this menu will appear, at the same time
you can set some parameters of TPM device.
► TPM Support
This item is used to enable or disable TPM function.
► TPM Current Status
You can see the current status of TPM device through this item.
► TPM Status
You can see the next status of TPM device when your computer restart. The available setting
values are: No change, Clear, Enable & Active, Disable & Deactivate.
Phoenix - AwardBIOS CMOS Setup Utility
Security Chip Conguration
TPM Support [Enabled] Item Help
TPM Current Status
Disabled & Deactivated
TPM Status [No change] Menu Level ►
Enable / Disable
Trusted Platform Module
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
Disabled
To Next Page
Loading...
