Foxconn P35A Series - Page 22

2
15
8-pin ATX 12V Power Connector : PWR2
The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.
Exclusive Graphics power Connector : PWR3
This connector is an auxiliary power for graphics card. Exclusive power for graphics card is for
better graphics performance and future upgrade usage.
IDE Connectors : PIDE
With the provided Ultra DMA133/100/66 IDE ribbon
cable, you can connect to any type of hard disk and
CD/DVD ROM/RW drive. You also can congure as a
disk array through RAID controller.
Floppy Disk Drive Connector : FLOPPY
This motherboard includes a standard oppy disk drive (FDD) connector, supporting 360KB,
720KB,1.2MB, 1.44MB, and 2.88MB FDDs.
Pin No. Denition Pin No. Denition
1 GND 5 +12V
2 GND 6 +12V
3 GND 7 +12V
4 GND 8 +12V
Connect a 4-pin
power plug
We recommend you use 8-pin ATX 12V power supply. If you
want to use 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
C
A
U
T
I
O
N
!
GND
+12V
1
4
5
8
PWR2
+5V
GND
GND
+12V
1
4
PWR3