To Next Page

To Previous Page

4. It then goes to “Disks” item. Press <Enter> to display the hard disks list for this RAID0

system.

5. From the hard drive list, use Up or Down arrow key to reach the hard disks you want

to combine them as RAID0, then press <Space> key to select them. A triangle sign

will appear to indicate the drive selected. Here, we select two 149.0GB hard disks as

an example. Press <Enter> key to nish the selection.

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

Name:

RAID Level:

TryRAID0

RAID0(Stripe)

Port Drive Model Serial # Size Status

►0 Hitachi HDS721616PLA

PVF904Z21G2JZM 149.0GB Non-RAID Disk

ST380811AS

5PS1TAGW 74.5GB Non-RAID Disk

►2

SAMSUNG HD161HJ

S0V3J9APA30524 149.0GB Non-RAID Disk

ST380815AS

5RW1CA37

74.5GB Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done

2 SAMSUNG HD161HJ S0V3J9APA30524 149.0GB Non-RAID Disk

Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

[ CREATE VOLUME MENU ]

[ SELECT DISKS ]