Note: Make sure that the battery pack is always exposed to the ambient air. The battery pack is cooled by
natural convection. If the battery pack is entirely or partially covered or shielded, it may cause the battery
pack to stop operating.
6.3 Tools
The following tools will be required to install the battery.
6mm Magnetic Crimpers(B1) Safety Shoes(C1) Safety Gloves(D1)
Phillips Screwdriver(A1)
Safety Glasses(E1) Rubber Mallet(F1) Marker(G1) 8mm External
Hexagonal Socket(H1)
Cable Ties(I1) Hammer Drill Spirit Level(K1) Multimeter
@φ8mm(J1) (Vdc>500)(L1)
To Next Page
Loading...