To Next PageTo Next PageWhat to do if my FoxESS F6000 is showing Relay Fail?
If your FoxESS Inverter displays a Relay Fail error, disconnect PV (+) and PV (-) with DC. After the LCD switches off, reconnect and check again. If the problem continues, further assistance may be needed.
What to do if my FoxESS Inverter is showing GFCD Fault?
If your FoxESS Inverter is showing a GFCD Fault, disconnect PV (+) and PV (-) with DC. After the LCD switches off, reconnect and check again. If the problem persists, further assistance may be needed.
Provides critical safety warnings regarding live components, qualified personnel, and handling damaged inverters.
Lists key DC input parameters like max power, voltage, current, and MPPT ranges for different models.
Details AC output specifications including rated power, voltage, current, THD, and power factor.
Presents efficiency ratings and lists built-in safety and protection features like reverse polarity and overvoltage.
Outlines environmental and mounting requirements for safe and optimal inverter installation.
Provides a step-by-step guide for physically mounting the inverter bracket and the unit.
Describes the inverter's physical interface including the LCD screen, indicator LED, and touch key functions.
Details how to navigate and operate the inverter settings using the LCD screen and touch key.
Offers procedures for identifying and resolving common inverter faults and issues.
General| Number of MPPTs | 2 |
|---|---|
| Rated AC Output Power | 6000 W |
| Max. AC Apparent Power | 6600 VA |
| AC Voltage Range | 180 V - 280 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| THDI | < 3% |
| Protection Degree | IP65 |
| Rated AC Voltage | 230V |
| Operating Temperature Range | -25°C to 60°C |
