2
1. Notes on This Manual
1.1 Scope of Validity
This manual describes the assembly, installation, commissioning, maintenance and troubleshooting
of the following model(s) of FOXESS products:
R75, R100, R110
1.2 Target Group
This manual is for qualified electricians. The tasks described in this manual only can be performed
by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear in this document as
described below:
Danger!
“Danger” indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
Warning!
“Warning” indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
Caution!
“Caution” indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
Note!
“Note” provides important tips and guidance.
1.4 Symbols Explanation
This section explains the symbols shown on the inverter and on the type label:
CE mark.
The inverter complies with the requirements of the applicable CE
guidelines.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact during
operation.
Danger of high voltages.
Disconnect from the grid and the PV generator before opening the
device.
To Next Page
Loading...
