Foxpro X1 - Timer;User: Alarm; Timer;User: USER 1 & USER 2; Remote Settings: Download List; Remote Settings: AUX Cntrl

12
the Main Menu, selecting Timer/User option, and then selecting the “Stand Timer Reset.” The timer will
automatically reset to 00:00 if it is allowed to continue beyond 99:59.
7-13 Timer/User: Alarm
The Patriot remote features a visual alarm that can be set to go off after a span of time. The available times
are represented in minutes: 1 – 15 (individual steps) and 20-60 (steps of 5). When the alarm is set and the
configured time span passes, the stand timer (or clock if set to display the clock) will display a confirmation
message and the timer indicator will begin to flash. To set an alarm, select the “Alarm (minutes)” menu
item, push the “Select” button, and then use the “Scroll Up” or “Scroll Down” buttons to find the desired
time value. When the desired time value is selected, push the “Select” button to set the alarm.
7-14 Timer/User: USER 1 & USER 2
User button 1 and 2 can be assigned a function of your choice for quick one-button access. You can choose
from: Favorite 1, Favorite 2, Favorite 3, AUX, Recall, Timer reset, and Backlight. To set this, highlight the
“USER 1” or “USER 2” menu item, push the “Select” button, then use the “Scroll Up” or “Scroll Down”
buttons to cycle through the options. When the desired option has been set, push “Select” a final time to
set it. These settings are remembered between power cycles.
7-15 Remote Settings: Download List
Any time you reprogram the Patriot to add new sounds or rearrange existing sounds, you must download a
new copy of the play list to the transmitter. This menu item will guide you through that process. In order to
download the playlist, you will need a 3.5mm stereo male-to-male cable (included). See section 6-3 for
more information.
7-16 Remote Settings: AUX Cntrl
The auxiliary jack
operation specifications
can be changed from
either momentary or
latched. All FOXPRO
decoys require that the
jack be setup for
momentary. To configure the auxiliary jack setting, highlight the “Aux Control” menu item, push the
“Select” button, and then use “Scroll Up” or “Scroll Down” to toggle the two options. When the appropriate
setting is selected, push the “Select” button to set it. This setting is remembered between power cycles.
7-17 Remote Settings: View
The TX433 can display your sounds either by general numerical listing or by category listing. Sound
categories are the easiest to navigate if you have a large number of sounds. The TX433 supports up to 25
unique categories. To configure the view setting, highlight the “View” menu item, push the “Select” button,
and then use the “Scroll Up” or “Scroll Down” buttons to cycle through the options. When the appropriate
setting is selected, push the “Select” button to set it. This setting is remembered between power cycles.
7-18 Remote Settings: Snd Nums
The TX433 displays your sound list in a numerical format based upon the index value of each sound file. The
sounds are numbered from 000 – 299. You can choose to either have the index values visible in your sound
list or you can hide them. The advantage of hiding the numbers is that the sound names might be easier to
read. The options for this setting are “Show” and “Hide.” To toggle the options, highlight “Snd Nums” in the
menu, push the “Select” button, use the “Scroll Up” or “Scroll Down” button to cycle the options, then push
“Select” to set it. This setting is remembered between power cycles.
7-19 Remote Settings: About Info
The About Info screen displays a variety of information pertaining to version number, number of sounds
loaded, number of favorites, and transmitter health.
IMPORTANT NOTE
Some third party decoys may require latched operation as opposed to
momentary. A detailed list of other products and their specific requirements
is not maintained by FOXPRO. You will need to check with the equipment
manufacturer to determine if it is compatible and what the requirements
are.