34
Using your FOXTEL Digital set-top unit
Extra information
❖
Replacing the batteries in your remote control
When the batteries in your remote control are running low, the
following message will appear on your TV screen.
To remove the message, press back, then make sure you replace the
batteries as soon as possible. You may also see a‘low battery’symbol
in the i-search banner (see right).
To replace the batteries, insert two AA batteries as follows:
1. Push the catch at the bottom of the remote control battery
cover up, then lift off the cover.
2. Remove the old batteries.
3. Insert the new batteries. Be sure to match the + and – marks on
the batteries to their respective marks inside the battery
compartment.
4. Replace the battery cover, by inserting the tabs at the top of the
cover first, then pushing the cover into place.
✘ Don’t leave flat batteries in your remote control.
✔ Replace both batteries at the same time.
✔ Dispose of flat batteries in an environmentally-friendly way.
To Next Page
Loading...
