Your FOXTEL Digital set-top unit
❖
Connections to your digital set-top unit
YOUR FOXTEL DIGTAL SET-TOP UNIT
WARNINGS
Always disconnect your digital set-top unit from the power supply before you connect it to,
or disconnect it from any other equiment.
The only way to disconnect your digital set-top unit from the power supply is to remove the
power lead. Your digital set-top unit must therefore be installed near the power point, which
should be easily accessible.
The supplied power lead has a 2-way connector at one end and a plug at the other. You should
always insert the 2-way connector into your digital set-top unit before you insert the plug into the
power supply.
Do NOT connect the plug to the power supply until you have made ALL other connections.
Your digital set-top unit operates with a 240V AC, 50Hz power supply. Do not connect it to a
DC power supply.
If you are in any doubt about the power lead, its plug or its connection, consult a qualified electrician.
3
7
To Next Page
Loading...
