17
AutoMaster Pro Manual_English_V3.0
Figure 4-13 Sample Select System Scan Screen
2. To pause the scan, press the function key corresponding with Pause on the screen.
Figure 4-14 Sample Automatic system scan screen
3. At the end of successful automatic controller scan, a menu with a list of installed controllers
together with their DTC overview displays.
Figure 4-15 Sample auto scan screen
4. If there is diagnostic trouble code(s) detected in a control unit, press the function key
corresponding with Display DTC on the screen to view details of code information, and press
the function key Quick Erase to clear them.
To Next Page
Loading...
