Foxwell AutoMaster Pro - Update; Create a Foxwell ID

51
AutoMaster Pro Manual_English_V3.0
3. Scroll with the UP/DOWN arrow keys to highlight an application and press the ENTER key to
assign the application to the shortcut key.
4. Press any key to exit and return.
7 Update
The scanner can be updated to keep you stay current with the latest development of diagnosis.
This section illustrates how to register and update your scan tool.
To update your scanner, please follow the three steps as below:
Step1: Obtain an FOXWELL ID.
Step2: Register the product with the product serial number and product password.
Step3: Update the product by the update application FoxScanner.
For step 1 and 2, you can also go to our site with the link below.
Step 1: http://www.foxwelltech.com/support/item-216.html
Step 2: http://www.foxwelltech.com/support/item-217.html
7.1 Create a Foxwell ID
7.1.1 Register through Website
If you are new to FOXWELL, please register on www.foxwelltech.com and create a FOXWELL ID
first. If you have installed the update application FoxScanner, please refer to the registration
guide on 8.1.2.
1. To register through website:
To create a Foxwell ID and register your scan tool
a. Visit our site www.foxwelltech.com and then select Support>Register.
Figure 7-1 Sample Register Screen
b. Click Register link at the top right of the website or at the lower side of home page.