21
AutoMaster Pro Manual_English_V3.0
Figure 4-22 Sample function menu screen
2. Use the arrow keys to scroll back and forth through different screens of data.
Figure 4-23 Sample Freeze Data screen
3. Press function key Save to store freeze frame information. Or use the BACK key to exit.
Erase Codes menu lets you to clear all current and stored DTCs from a selected control module.
Also it erases all temporary ECU information, including freeze frame. So make sure that the
selected system are completely checked and serviced by technicians and no vital information will
be lost before clearing codes.
● To clear codes, make sure that the ignition key is switched to ON with the engine off.
● Erase Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that caused them.
1. Scroll with the arrow keys to highlight Erase Codes from Function Menu and press the ENTER
Figure 4-24 Sample Function Menu Screen
To Next Page
Loading...
