Foxwell AutoMaster Pro - Change Units; Configure Beeper

47
AutoMaster Pro Manual_English_V3.0
6.2 Change Units
Selecting Unit opens a dialog box that allows you to choose between US customary or metric
units of measure.
To change the unit setup:
1. Scroll with the arrow keys to highlight Units from Setup menu and press the ENTER key.
Figure 6-3 Sample Setup Screen
2. Press the LEFT/RIGHT arrow key select an item and press the ENTER key to save and return.
Figure 6-4 Sample Language Selection Screen
6.3 Configure Beeper
Selecting Beep Set opens a dialog box that allows you to turn on/off the beeper.
To turn on/off the beeper:
1. Scroll with the arrow keys to highlight Beep Set from Setup menu and press the ENTER key.
Figure 6-5 Sample Setup Screen