Foxwell AutoMaster Pro - System Selection

16
AutoMaster Pro Manual_English_V3.0
3. Enter a unique name for this vehicle and save it, and you will see this new vehicle in Vehicle
Data Recorder menu.
Figure 4-11 Sample Vehicle Record Screen
To identify a previously tested vehicle:
1. Select Vehicle record and press the ENTER key to start.
Figure 4-12 Sample tested vehicle identification screen
2. Select the vehicle under test and press the ENTER key.
4.2 System Selection
When you have completed the identification of vehicle, a menu for selecting system to test
displays. Menu options typically include:
● Auto Scan
● Control Unit
4.2.1 Auto Scan
Auto Scan performs an automatic system test to determine which control modules are installed on
the vehicle and obtain diagnostic trouble codes (DTCs) overview. Depending on the number of
control modules, it may take a few minutes to complete the test.
To perform an automatic system scan:
1. Scroll with the arrow keys to highlight Auto Scan from the menu and press ENTER to start.