Foxwell NT301 - Live Data Monitoring

NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
14
Figure 4-7 Sample Erase Codes Screen
3. Check the codes again. If any codes remain, repeat the Erase Codes steps.
4.3 Live Data
Live Data menu lets you view, record and playback real time PID data from the electronic control
module.
Menu options typically include:
● View Data
● Record Data
● Playback Data
4.3.1 View Data
The View Data function allows real time viewing of the vehicle’s electronic control unit’s PID data,
including sensor data, operation of switches, solenoids and relays.
Menu options typically include:
●
Complete Data
●
Custom Data
●
Unit of measure (Please refer to Chapter 7 System Setup)
4.3.1.1 Complete Data Set
Complete Data Set displays all supported PIDs of the vehicle being tested.
To view all live PID data:
1. Use the UP/DOWN key to highlight Live Data from Diagnostic Menu and press the ENTER
key.
Figure 4-8 Sample Diagnostic Menu Screen
2. Select View Data from the list and press ENTER key to confirm.