Foxwell NT301 - Unit of Measure; Key Beep Set

NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
39
2. A message prompting to reset factory default displays. Answer Yes to confirm the request or
answer No to abort and return.
Figure7-11 Sample Reset Factory Default Screen
7.3 Unit of measure
Unit of measure opens a dialog box that allows you to choose between US customary or metric
units of measure.
To change the unit setup:
1. Scroll the UP/DOWN keys to highlight Unit of Measure from Setup menu and press the
ENTER key.
Figure 7-12 Sample Setup Screen
2.Press the UP/DOWN arrow key select an item and press the ENTER key to save and return.
Figure 7-13 Sample Unit Selection Screen
7.4 Key Beep Set