NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
1. Use the UP/DOWN key to highlight LCD Test from Setup menu and press the ENTER key to
Figure 7-22 Sample Tool Self-test Screen
2. Scroll with the up and down arrow keys to select the desired LED lamps to check. The LED
should turn on/off according to the selected commands.
Figure 7-23 Sample LED Test Screen
4. To quit the test, press the BACK key.
Selecting About option opens a screen that show information about your code reader, such as
serial number and software version.
To view information of your code reader:
1. Use the LEFT/RIGHT key to highlight About from home menu and press the ENTER key.
To Next Page
Loading...