Foxwell NT301 - Compression IGN Required Monitors; Allowed INC Monitors

NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
37
7.2.2 Compression IGN Required Monitors
In this menu, the operators can configure monitors for compression ignition cars (diesel engines).
To configure spark compression required monitors:
1. Use the UP/DOWN key to highlight Compression IGN Required Monitors from the menu and
press the ENTER key to confirm.
Figure 7-7 Sample Configure Monitors Display
2. The custom monitors selection screen displays and Use the RIGHT key to select or deselect a
monitor or press the LEFT key to deselect all the monitors. Press the ENTER key to confirm and
BACK key to cancel.
Figure7-8 Sample Spark IGN Required Monitors Selection Screen
7.2.3 Allowed INC Monitors
Emissions tests vary depending on the geographic or regional area in which the vehicle is registered.
NT301 provides a more flexible way to meet different standards, which allows the user to select 0, 1, 2,
3 INC monitors in test.
To configure allowed INC monitors:
1. Use the UP/DOWN key to highlight Allowed INC Monitors from the menu and press the ENTER
key to confirm.