Foxwell NT301 - System Setup and Configuration

NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
33
To review recorded data:
1. Use the LEFT/RIGHT key to highlight Review Data from home screen and press the ENTER
key.
Figure 6-1 Sample Home Screen
2. A screen with a list of test records displays. If no data is recorded, the message “No Data
available!” is displayed.
Figure 6-2 Sample Playback Screen
3. Use the UP/DOWN key to highlight an optional record and press the ENTER key. Details of the
test record displays. View and analysis the recorded information, then press BACK to exit.
7 System Setup
This section illustrates how to program the code reader to meet your specific needs.
When Setup application is selected, a menu with available service options displays. Menu options
typically include:
● Language
● Configure monitors
● Unit of measure
● Key Beep Set
● Diag Beep Set
● Tool self-test
7.1 Select Language
Selecting Language opens a screen that allows you to choose system language.
To configure system language:
1. Use the LEFT/RIGHT key to highlight Setup from home screen and press the ENTER key.