31
ENGLISH
Clean the heat exchanger (radiator)
The surfaces of the heat exchanger (radiator) come into contact with
external air and may be subjected to deposits and impurities (dust,
mud, straw, etc.). Clean them if necessary using compressed air or
steam.
Replace the ancillary belt if it shows signs of abrasions,
cracks or tears or if it is soiled with oil or fuel.
ATTENTION!
When the engine is off, but still hot, the belt may start
to move without warning. Wait for the engine
temperature to decrease to prevent serious danger of
an accident.
When using compressed air, it is required to use
suitable personal protections for hands, face and eyes.
The requirements can be found in the ACCIDENT
PREVENTION paragraph
To Next Page
Loading...
