8
Fit the appliance in the compartment; fix the oven to the cabinet with the 4 screws provided, using the holes prepared in the side panels.
Cabinet requirements
For built-in units, the components (plastic materials and veneered wood) must be assembled with heat-resistant adhesives (max.100°C):
unsuitable materials and adhesives can result in warpingand ungluing. The cabinet must allow sufficient room for the electrical connections. The
cabinet in which the oven in fitted must be strong enough to take the weight of the equipment.
The oven must be securely installed in the recess. The oven can be installed in a column cabinet, provided sufficient ventilation is guaranteed.
To Next Page
Loading...
