9
Replacing the oven lamps
Franke ovens are equipped with a rectangular side lamps and 2 circular rear lamps.
Replace the oven lamp as follows:
- switch off the power to the appliance at the omnipolar switch used for connecting it to
the electrical system, or disconnect the plug, if accessible;
Rear ring lamp:
- Unscrew the glass cover (A)
- unscrew the lamp and replace with one resistant to high temperatures (300°C), having
the following characteristics:
Voltage: 220/230V - 50Hz
Power: 15W
Fitting: (E14) small
Side lamp
- remove the glass cover (B), prising it off with a flat screwdriver,
unscrew the lamp and replace it with one resistant to high temperatures (300°C),
having the following characteristics:
Voltage: 220/230V - 50Hz
Power: 15W
Fitting: (E14) small
To Next Page
Loading...
Need help?
General