Franke AX937 DXA - Advanced Electronic Programmer; Setting the Digital Clock; Manual Oven Operation

10
ADVANCED Electronic cooking programmer with bottom oven temperature control
Used for programming the bottom oven or its grill in the following modes:
• delayed start of cooking with set time;
• immediate start of cooking with set time;
• timer.
•
•
•
•
•
• Button functions:
hours, minutes timer
cooking duration
end of cooking
manual switching
- : time setting (back)
- + time setting (forwards)
-
How to set the digital clock
After the appliance has been connected to the power supply, or when the power has gone out, the clock display will automatically reset to
0:00 and begin to blink. 0.00
• Press the
button and then set the correct time (within four seconds) using the [—] and [+]buttons.
Button + sets the time forward.
Button - sets the time backward.
For possible clock adjustments, repeat the steps described above:
Oven manual operation
When a cooking programme is selected, the oven immediately starts heating up, as indicated by the symbol on the display.
For each programme, a recommended cooking temperature is shown on the display ; this temperature can be changed by the user with
the knob : turn anticlockwise to decrease the temperature, or clockwise to increase it.