11
The flashing symbol
on the display indicates the preheating phase, during which the oven has not yet reached the required temperature. Once the set
temperature is reached, the oven beeps for two seconds and the symbol
stops flashing (steady) to indicate the cooking phase.
Immediate start of cooking with set time
Assuming cooking for 30 minutes at 200°C
Turn the programme selector knob; the display will show a recommended cooking temperature, which can be adjusted with the temperature C control knob.
Press the button
and then buttons [- ] and [+] to set the required cooking duration of 30 minutes.
Release the button; after 4 seconds the flashing symbol
indicates the preheating phase. The countdown starts only when the required temperature has
been reached (except for grill function, when the countdown starts immediately; see B). The display indications are as follows:
A - preheating phase
(the set time can be checked with the button
and the temperature with the buttons .- and + )
Once the set temperature is reached, the oven beeps for two seconds and the symbol
stops flashing (steady) to indicate the cooking phase.
B - cooking phase
(remaining cooking time / set temperature - alternating)
C - end of cooking
At the end of cooking an intermittent signal (**) will sound for 1 minute, which can be silenced with the button + ,
and stop ,; the display will show
the message
To Next Page
Loading...
Need help?
General