Franke DC 2200 - MAINTENANCE; Daily Cleaning; Air Filter Maintenance

9
6.0 MAINTENANCE
CAUTION !! NO WATER ALLOWED ON THE TOP OF THE DRYING
CABINET.
1. Daily
Use non-aggressive washing agent and soft wash cloth, for flushing use wet wash
cloth, wipe and dry.
2. Air filter
Cleaning interval in normal use 3 months.
Power connection plug must be disconnected before cleaning or replacing the air
filter. (Turn the main switch to position 0).
Unscrew the safety screw from the separate front plate on the control panel and take
off the air filters (2 pcs) on the rails of the front plate. See the drawing on the page 8.
Wash the air filters with pure water. Use non-aggressive agent when necessary.
Cleaned air filter operates as a new one.
If the air filter is damaged or does not work properly after washing - replace the air
filter with a new one.
When installing the air filters back on to the rails check the direction of the air flow
(arrow pointing downwards). Wet air filter will dry during the drying cycle.
Put the rails into the chamber and tighten the front plate back to the control panel by
the locking screw.
Bottom flap can be opened
for cleaning if necessary
Air filters
can be taken
off for cleaning and
replacing
Safety screw