Franke HCMF-30P User Manual

1019011739 - Rev. A - November 30, 2018
CONTROLS & SETTINGS
Power ON/OFF Switch
The High Capacity Meat Freezer (HCMF-P) is provided
with a main power ON/OFF switch, located above the
louvered access panel at the back of the unit (Fig. 16).
The switch illuminates when power is turned ON.
POWER ON/OFF SWITCH
Fig. 16
Factory Preset Temperature & Adjustable
Range
The temperature for the HCMF-P is preset at the
factory. The preset temperature is recommended for
normal operation. If needed, the temperatures can be
adjusted. The factory preset and adjustable range is
shown in the following table (Table 2).
FACTORY PRESET
TEMPERATURE/CONTROL
SETTING
ADJUSTABLE TEMPERATURE
RANGE
-5.0° F
(-20.5° C)
-10.0° to 0.0° F
(-23.0° to -18.0° C)
Table 2
Unit Temperature Adjustment
To adjust the temperature of the unit:
1. Locate temperature controller, above front
louvered access panel (Fig. 17).
Fig. 17
TEMPERATURE CONTROLLER
1. Press SET (Fig. 18).
Fig. 18
2. Press SET again. The current setpoint is displayed.
Press the UP and DOWN arrow buttons to adjust
the temperature setting (Fig. 19).
Fig. 19

Franke HCMF-30P Specifications

General

Brand	Franke
Model	HCMF-30P
Category	Freezer
Language	English