19011739 - Rev. A - November 30, 20187
STEP 3
If needed, remove, rotate, and reinstall front loading
door (refer to
Reversing the Front Loading Door
, page
8). Door should open towards grill station.
Fig. 4
STEP 4
Position glove holder bracket over mounting holes o
top of front loading door. Fasten bracket to door with
two (2) of the supplied screws (Fig. 5).
Fig. 5
STEP 5
Load glove holder bracket with disposable gloves by
positioning attachment holes on disposable glove
pack over pins on front of bracket (Fig. 6).
Fig. 6
STEP 6
Plug unit into appropriately-rated electrical receptacle,
per specifications noted on unit data label (Fig. 7).
Restrain excess cord length using plastic wire ties.
Fig. 7
INSTALLATION
To Next Page
Loading...
Need help?
General
