3 Loading the Freezer
The High Capacity Wall Freezer is designed to
provide more cubic feet of compartment storage
space, with two shelves for boxed product,
including:
– Upper and middle wire shelfs that are
adjustable for different box or case heights
– A raised wire-form bottom shelf designed
to ensure good air circulation in the freezer
compartment (Fig 14).
Important Product Loading Tips:
– DO NOT over-load the High Capacity
Wall Freezer. Like all freezers, it
requires good air circulation to maintain
uniform frozen product temperatures.
– DO NOT let inner plastic bags
block or obstruct the Evaporator air
intake openings inside the freezer
compartment.
– DO make sure all cartons are pushed
back fully into the compartment and that
the front door closes and seals (Fig. 15).
NOTE: The recommended maximum
HOLD time for all products is 24 hours.
Fig 14. Shelf Placement
Fig 15. Product Loading
ofPage 1811
To Next Page
Loading...
