Franke HCWF-P User Manual

19011713 - Rev. A - November 29, 20189
INSTALLATION
S T E P 11
Cover exposed all-thread rod using provided length of
split plastic tubing. Trim tubing as needed (Fig. 12).
Fig. 12
STEP 12
Uncoil power cord from within evaporator housing.
Plug unit into appropriately-rated electrical receptacle,
per specifications noted on unit data label (Fig. 13).
Restrain excess cord length using plastic wire ties.
Fig. 13
STEP 13
Wash, rinse, and sanitize wire shelves as noted on page 4. Clean all interior an exterior surfaces of unit with a store
approved cleaning and sanitizing solutions and clean, sanitized towels. Place clean, dry shelves at desired heights
within freezer compartment (Fig. 14).
Fig. 14

Franke HCWF-P Specifications

General

Brand	Franke
Model	HCWF-P
Category	Freezer
Language	English